Click on the image to check the artwork
Wallboard: Double skinned, 50mm thick EPS, 0.376 mm color steel, tongue and groove interlock structure, width is 1150mm. Galvanized steel roof panel.
Basement: Galvanized steel, 300mm high, 2 rows of grids and 3 rows of vein plates, painted.2pcs of ramps, 520 x 2000mm (W x L).
Door: 3-folds, 3000 x 2600mm (W x H), without any frame.1 piece of service door, 650 x 1800mm (W x H). The side service door with a pressure lock which will automatically open when the pressure inside is over-pressure.
Air Circulation System: 1 unit of 7.5kw turbo intake fan, air capacity is 21000m3/h. Exhaust as optional.
Generator Cabinet: Intake from rear side, exhaust from rear upper, quadrate steel frame, galvanized steel cover, with heat preservation material inside.
Heating System: BT18 diesel burner, heating productivity is 180000Kcal/h, stainless steel heat exchanger. Max working temperature at 80ºC. The Pneumatic damper for spraying to baking cycle
Lighting System: Ceiling light has 8units x 4pcs = 32pcs of 36w lamp, with electronic ballast; side light as optional
Control System: Spraying, Heat Spraying, Baking, Time Setting, Lighting Switch, Temperature Controller, Failure Indicator, Power Supply, Emergency Stop
Purification System: Dual filtering structure, the primary filter can capture granules larger than 10μm. Ceiling filter can capture granules bigger than 4μm. The whole purification system has capacity of large volume of dust. Its filtering rate reaches 98%. Air pressure balance gauge, TSP≤1.2mg/m3
Model Outside Size
(MM) Inside Size
(MM) Front Door
(W x H) Service Door
(W x H) Total Power
(KW)
RM-1 7000*5250*3400 6900*3900*2650 3000*2600 650*1800 9.5
Spray Booth